KAPLAR™ KPPHT High Temperature Capacitor Film

Swipe to explore

Characteristics		Value		Unit	Method
Physical Properties
		Value	Variation %
Nominal thickness	< 5 µm	3, 3.5, 4, 4.5	±5	µm	IEC 60674-2
	6 to 9 µm	6, 6.5, 7, 7.5, 8, 9	±4
	> 9 µm	10, 11, 12	±3
Film width		As per customer specification		mm	SRF - TM
Density		0.905		gm/cc	IEC 60674-2
Melting point		165 ~ 172		°C	IEC 61074 DSC
Crystallinity		>50		%	ISO 11375-3 DSC
Surface Properties
Surface Roughness (Ra)	< 5 µm	0.06 - 0.12		µm	DIN EN 4287, 4288
	6 to 9 µm	0.09-0.15
	> 9 µm	0.10-0.16
Treatment Level		≥ 34		Dyne/cm	ASTM D 2578
Electrical Properties
Dielectric constant at 50Hz		2.20 ± 0.1		-	IEC 60674-2
Dissipation factor, tan δ at 50Hz		<2.0 x 10^-4		-
Surface Resistivity		≥ 10¹⁴		Ω/sq.
Volume Resistivity		> 10¹⁵		Ω m
DC Dielectric strength	< 5 µm	Minimum > 400		Vdc/µm
	< 5 µm	Average > 525
	6 to 9 µm	Minimum > 500
	6 to 9 µm	Average > 575
	> 9 µm	Minimum > 525
	> 9 µm	Average > 575
Electrical weak points		Avg. defects < 2/m² at 300 Vdc/µm		No's
Mechanical Properties
		MD	TD
Tensile Strength	< 5 µm	≥130	≥240	MPa	IEC-60674-2
	6 to 9 µm	≥135	≥250
	> 9 µm	≥135	≥250
Elongation at break		≤180	≤60	%
Thermal Properties
Heat Shrinkage (120°C for 15 min)	< 5 µm	≤ 4.5	≤ 1.5	%	IEC-60674-2
	6 to 9 µm	≤ 3.5	≤ 1.0
	> 9 µm	≤ 3.5	≤ 1.0
Chemical Properties
ASH Content		< 30		PPM	ASTM D 5630
Roll Properties
Characteristics			Value	Unit	Tolerance
Paper Core		Inner Diameter	152	mm	+ / - 1.0
		Centring of Core	-	mm	-0, +2.0
		Core Length	Nominal width of the film	mm	-0, +3.0
Film Length		Order Length		Meter	-10% to +100 Meter

MD – Machine Direction | TD – Transverse Direction

KAPLAR™ KPPHT