KAPLAR™ KPPNT Capacitor Grade Film | Electrical BOPP Film

Swipe to explore

Characteristics		Value		Unit	Method
Physical Properties
		Value	Variation %
Thickness by weight	< 5 µm	4.5, 5.0	±5	µm	IEC 60674-2
	6 to 9 µm	6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0	±4
	> 9 µm	10.0, 11.0, 12.0	±3
Film width		As per customer specification		mm	SRF - TM
Density		0.905		gm/cc	IEC 60674-2
Melting point		162 ~ 170		°C	IEC 61074 DSC
Crystallinity		>45		%	ISO 11375-3 DSC
Surface Properties
Surface Roughness (Ra)	< 5 µm	0.07 - 0.12		µm	DIN EN 4287, 4288
	6 to 9 µm	0.09 - 0.15
	> 9 µm	0.10 - 0.16
Treatment Level		≥ 34		Dyne/cm	ASTM D 2578
Electrical Properties
Dielectric constant at 50Hz		2.20 ± 0.1		-	IEC 60674-2
Dissipation factor, tan δ at 50Hz		< 2.0 x 10^-4		-
Surface Resistivity		≥ 10¹⁴		Ω/sq.
Volume Resistivity		> 10¹⁵		Ω m
DC Dielectric strength	< 5 µm	Minimum > 400		Vdc/µm
	< 5 µm	Average > 450
	6 to 9 µm	Minimum > 450
	6 to 9 µm	Average > 500
	> 9 µm	Minimum > 500
	> 9 µm	Average > 550
Electrical weak points		Avg. defects < 3/m² at 300 Vdc/µm		No's
Mechanical Properties
		MD	TD
Tensile Strength	< 5 µm	≥120	≥230	MPa	IEC-60674-2
	6 to 9 µm	≥130	≥240
	> 9 µm	≥135	≥250
Elongation at break		≤190	≤70	%
Thermal Properties
Heat Shrinkage (120°C at 15 mins)	< 5 µm	≤ 5.0	≤ 1.5	%	IEC-60674-2
	6 to 9 µm	≤ 4.0	≤ 1.0
	> 9 µm	≤ 4.0	≤ 1.0
Chemical Properties
ASH Content		< 50		PPM	ASTM D 5630
Roll Properties
Characteristics		Value		Unit	Tolerance
Paper Core		Inner Diameter	152	mm	+ / - 1.0
		Centring of Core	-	mm	-0, +2.0
		Core Length	Nominal width of the film	mm	-0, +3.0
Film Length		Order Length		Meter	-10% to +100 Meter

MD – Machine Direction | TD – Transverse Direction

KAPLAR™ KPPNT